New Install Combo+AP-Mesh — Island Support

New Install

• Combo Unit • No Switch

• Download PDF

Before you begin: If any device other than Island has been plugged into the modem, unplug it and reboot the modem.

Step 1:

Power up Island. Wait about 30 seconds for the light to turn from white to blue.

Step 2:

Plug Island into the combo unit.

Step 3:

Plug the AP(s) or mesh into Island. Note: If using a mesh system, disable the router function in the mesh and make sure it’s in AP mode.

Step 4:

Place the combo unit into bridge mode according to the ISP’s or the manufacturer’s instructions. Disable its Wi-Fi component (if any). Reboot the combo unit. Note: If you can’t put the combo unit into bridge mode, Island will still function, but remote access capability and performance will be affected.

Step 5:

Make sure you are connected to the newly installed Wi-Fi and launch the app if you haven’t already. The app will discover Island and continue with set up.